WSERD50 MOTOR GUIDE

TECHNICAL SPECIFICATIONS

Power: lithium battery DC12V

Protection Index: IP44

Received Frequency: 433.92MHz

Code: Rolling

one motor can be controlled by 15 units of remotes at most

WIRE CONNECTIONS

wire-connection

CODE LEARNING

NOTE: after code learning, you can use the remote to control the motor to run up, down and stop

code-learning

CODE DELETING

code-deleting

DIRECTION CHANGE

direction-change

SET STEP BY STEP FUNCTION

step-by-step-function

DELETE STEP BY STEP FUNCTION

assign-motor

UP LIMIT SETTING

limit-setup

DOWN LIMIT SETTING

limit-down

UP LIMIT DELETING

limit-up-delete

DOWN LIMIT DELETING

limit-down-delete

THE THIRD LIMIT

first, move the blind to the desired position

3rdlimit

NOTES

  1. The third limit is also named as intermediate limit, it can be set at any position between up limit and down limit.
  2. If the up limit or down limit is deleted, the third limit will be deleted automatically.

ANNOUNCEMENT

The setting may fail due to other signal interference. In this case, please reset.

The remote RE101 is taken as an example in this instruction. The receiver is compatible with several other rolling code remotes.

If remote’s battery is in low power, please replace it.

The receiver is of high voltage, please do not place it in humid atmosphere.

Children should be supervised to ensure that they do not play with the appliance.

Working temperature: -10deg C to +55deg C

All products are as per real subjects. There will be no prior notification if any change in appearance, color, functions etc.