RC201 WALL SWITCH RECEIVER
The receiver will cut the power after working for 4mins continuously.
The receiver can be controlled by 15 remotes at most.
The receiver's UP/STOP/DOWN buttons can also control the motor.
NOTES: When up/down/program button is pressed, light LED1 is on. When program button is pressed for 2 seconds, light LED2 is on. When program button is pressed for 10 seconds, light LED2 is off and LED3 is on.
Remote B can control the tubular motor after it learns code from remote A
SET STEP BY STEP FUNCTION
DELETE STEP BY STEP FUNCTION
Setting may fail due to the interference of signal. If in this case, please reset.
The remote RE101 is taken as an example in this instruction. The receiver is compatible with several other rolling code remotes.
Please do not press buttons for too long in case life span of battery declines. Pressing time should be at 0.5s, interval time should be 1 second. If the battery is in low power, please replace battery.
The control unit is of high voltage. Please do not place it in humid atmosphere.
Children should be supervised to ensure that they do not play with the appliance.
Ambient temperature: -10℃ to +55℃
All products are as per material subjects if there is change in appearance, color, function etc. This information is subject to changes without prior notice.