WSER50 50/16 Retractable Awning

Suitable for medium to large size retractable awnings up to 13 ft projection, (with 2 arms).

Either manual or automatic inner limit setting is possible.

WSER Retractable Motor Instructions – click here

WSER Retractable Motor Programming Sequences – click here

Product Description

The WSER50 retractable awning motor are designed to automatically set their inner limit based on tension. It will also allow you to set the inner limit manually if you require.

When using the auto inner limit setting, the outer limit is set manually using the remote and it will find its own inner stopping position by detecting the resistance as it reaches the fully closed position the first time it is closed. After this, the motor will stop in this position after detecting an increased resistance of 25% while moving.

On larger retractable awnings, 25% is sometimes not enough so you can increase this to 50%, 75% or 100% if required. It’s rare to need this adjustment but it’s a good feature to have.

When used with Sun/Wind sensors or Motion sensors, this motor detects a pulse from the sensor issued every 20 minutes. If the awning is out and does not receive a signal from the sensor for half an hour, it will close itself automatically as a protective measure assuming the sensor has failed or the batteries are drained.

This safety feature is the main reason you should always choose this motor for retractable awnings if a sensor is going to be used.

  • 7 year replacement warranty
  • Electronic limit switch
  • Built-in receiver
  • Wireless limit setting
  • External antenna

120V/60HzType 50/16
Rated Torque (N.m)50
Output Speed (rpm)16
Nominal Consumption (W)280
Nominal Voltage (V)120
Nominal Current (A)2.40
Running Time (Mins)4
Protection Index (IP)44
Total Length (in)24.80
Maximum Turnsinfinity
Net Weight (lb)5.84


WSER50 50/16 Retractable Awning
WSER50 50/16 Retractable Awning