WALL MOUNT RE201-203 REMOTES

PRODUCT APPEARANCE

re201-appearance

TECHNICAL SPECIFICATIONS

Power: 3V
Code: Rolling
Currency: ≤12mA
Frequency: 433.92MHz
Working Temperature: -10℃ to +60℃ (LCD remote)
Working Temperature: -20℃ to +60℃ (Non-LCD remote)

CODE LEARNING

NOTE: Please do not perform code learning in group control mode.

re201-code

SINGLE CONTROL

Select a channel by pressing K1/K3 as the current channel, then you can control this channel by pressing a UP/STOP/DOWN button.

GROUP CONTROL (LCD REMOTE)

re201-group-control

DELETE GROUP CONTROL

re201-group-control-delete

LCD TIMER REMOTE (4 CHANNELS)

re201-4channel

LCD TIMER REMOTE (1 CHANNEL)

re201-1channel

PLEASE NOTE

  1. The remote must enter timing setting page if you want to set timing points. There should be a timing clock on the upper left corner, otherwise, the setting is invalid. If there is no clock on the screen, please hold STOP button and press K2 within 10 seconds, there will be a clock on the upper left corner.
  2. It is better not to press the remote’s buttons too long so as to prolong the battery’s life. The button press should be about 0.5s with 1s interval.
  3. The remote will stop working if the battery is in low power. Please replace the battery.
click here to view pdf
back to Support