Remote Control Motor WSER50 folding arm motor

Remote Control Motor WSER50 folding arm motor Image

These motors are designed to automatically set their inner limit based on tension. It will also allow you to set the inner limit manually if you require.

When using the auto inner limit setting, the outer limit is set manually using the remote and it will find its own inner stopping position by detecting the resistance as it reaches the fully closed position the first time it is closed. After this the motor will stop in this position after detecting an increased resistance of 25% while moving.

On larger folding arms, 25% is sometimes not enough so you can increase this to 50%, 75% or 100% if required. It’s rare to need this adjustment but it’s a good feature to have.

When used with Sun/Wind sensors or Motion sensors, this motor detects a pulse from the sensor issued every 20 minutes. If the awning is out and does not receive a signal from the sensor for half an hour, it will close itself automatically as a protective measure assuming the sensor has failed or the batteries are flat.

This safety feature is the main reason you should always choose this motor for Folding Arm Awnings if a sensor is going to be used.

7 year replacement warranty

Electronic limit switch

Built-in receiver

Wireless limit setting

External antenna

120V/60HzType 10/33Type 30/16Type 50/16
Rated Torque (N.m)103050
Output Speed (rpm)331616
Nominal Consumption (W)186186280
Nominal Voltage (V)120120120
Nominal Current (A)1.601.602.40
Running Time (Mins)444
Protection Index (IP)444444
Total Length (mm)630600630
Maximum Turnsinfinityinfinityinfinity
Net Weight (kg)2.302.452.65

tubular motor compliance

Remote Control Motor WSER50 folding arm motor

Remote Control Motor WSER50 folding arm motor Image

These motors are designed to automatically set their inner limit based on tension. It will also allow you to set the inner limit manually if you require.

When using the auto inner limit setting, the outer limit is set manually using the remote and it will find its own inner stopping position by detecting the resistance as it reaches the fully closed position the first time it is closed. After this the motor will stop in this position after detecting an increased resistance of 25% while moving.

On larger folding arms, 25% is sometimes not enough so you can increase this to 50%, 75% or 100% if required. It’s rare to need this adjustment but it’s a good feature to have.

When used with Sun/Wind sensors or Motion sensors, this motor detects a pulse from the sensor issued every 20 minutes. If the awning is out and does not receive a signal from the sensor for half an hour, it will close itself automatically as a protective measure assuming the sensor has failed or the batteries are flat.

This safety feature is the main reason you should always choose this motor for Folding Arm Awnings if a sensor is going to be used.

7 year replacement warranty

Electronic limit switch

Built-in receiver

Wireless limit setting

External antenna

120V/60HzType 10/33Type 30/16Type 50/16
Rated Torque (N.m)103050
Output Speed (rpm)331616
Nominal Consumption (W)186186280
Nominal Voltage (V)120120120
Nominal Current (A)1.601.602.40
Running Time (Mins)444
Protection Index (IP)444444
Total Length (mm)630600630
Maximum Turnsinfinityinfinityinfinity
Net Weight (kg)2.302.452.65

tubular motor compliance

alpha tubular motors      alpha window motor controllers      alpha window motor accessories      alpha window motor sensors       alpha window motor support guides